|
Står som ubrugt. Kun brugt i demorum
Black 2mm electrolytically galvanized steel front with industrial, burnt teflon powder coating.
Dark grey 1.5mm chassis for perfect screen against RF effects
High-quality, tested components and power pack components, transformer shielded
Special high frequency compensation for outstanding resolution in the HF area
Audiophile equalizer circuits with ALPS potentiometers
Large audio bandwidth
Gain preamp stages with 40dB range and excellent noise values
More than 22dB headroom on all inputs and outputs
3 inputs per channel Line/Line/Mic for unlimited applications
Modular RIAA Phono preamp plug-on cards. 3 pieces standard from PM4000 upwards.
Subsonic filter only for phono inputs for full bandwidth with CD/Line signals
Microphone inputs A+B with 80Hz Low Cut for speech intellegibility
60mm ALPS soft slide channel faders
45mm ALPS PRO soft slide Long Life Crossfader for precise Mixing
PM8000 with K-ALPS faders available
All Fader wired separately for simple service
Shielded PCB's
Crossfader internally disconnectable
Output voltage internally interchangable between 1,5V - 7,5V
Symmetrical microphone inputs on XLR sockets with all models
Symmetrical and asymmetrical master and monitor outputs on XLR+Cinch and 6.3mm Jack+Cinch
Large ALPS CUE push buttons
Precise 13-segment True RMS VU-Meter shows the output level as long as no CUE button is pressed
Fully automatic AUTOCUE circuit lights up CUE ON LED if CUE buttons are pressed and switch VU-Meters as well as headphone output into the Input Gain mode
2 parallel outputs for Recording or lighting systems |