| The P1108-T is a weatherproof full range, wide-dispersion, two way loudspeaker system suitable for several indoor or outdoor applications where good speech intelligibility and music reproduction are required.
In a single-piece rotational moulded UV protected polyethylene cabinet the P1108-T combines a 1,5” diaphragm assembly compression driver loaded on a 1” rotatable constant directivity 90°x60°CD horn with a 8” high efficiency low-frequency transducer with a 1.5” voice coil.
The cabinet is equipped with 4 x M 8 brass inserts and a steel U-Bracket. The front logo is in aluminium and rotatable.
The grille is in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing.
P1108-T is suitable for indoor and outdoor installations, it meets the requirements of IP 55 code (International Protection Rating).
Features
100 W RMS
Weatherproof cabinet IP 55
Aluminium grill and stainless steel bracket
One 8" high-output LF transducer with 1.5" voice coil
One RCF Precision Neodymium 1" Compression Driver with 1.5" voice coil
90° x 60° constant directivity horn
2° x 15° enclosure sides for cluster configurations
Active Mosfet Compression Driver Protection
LICC (Low Impedance Compensated Crossover) network
2 metres 4 x 1.5 Input cable
Acoustical Specifications
Frequency Response -10 dB: 80 Hz ÷ 20 kHz
Frequency Response -3 dB: 110 Hz ÷ 18 kHz
Max SPL @ 1m: 121 dB
Horizontal coverage angle: 90°
Vertical coverage angle: 60°
Directivity index; Q: 11
System Sensitivity: 95 dB
Nominal Impedance: 16 Ω
Power Handling: 100 Watt
Peak Power Handling: 400 Watt
Recommended Amplifier: 200
Protections: Dynamic protection on Compression Driver
Crossover frequencies: 2200 Hz
TRANSDUCERS
Compression Driver: 1" throat, 1.5" coil diaphragm assembly
Nominal Impedence: 8 Ω
Input Power Rating: 20 Watt AES
Sensitivity: 107 dB
Woofer: 8" woofer, 1.5" voice coil
Nominal Impedence: 16 Ω
Input Power Rating: 100 Watts AES
Sensitivity: 94 dB
INPUT SECTION
Input connector: 4 x 1.5 mm square 2 m Neoprene cable
Constant voltage transformer: 70/100
Power Selection: 70V/30W, 15W - 100V/60W, 30W
CABINET
Cabinet Material: 8 mm Polyethylene rotomoulded
Hardware: 4 x M8 + U-Bracket and Pair of spacers
Grille: Custm perforated aluminium grille with open-cell fiber and water repellent woven fabric backing
Colour: Grey
PHYSICAL SPECIFICATIONS
Height: 266/10.47 mm/inch
Width: 493/19.40 mm/inch
Depth: 250/9.84 mm/inch
Net Weight: 12,5/27.55 Kg/Lbs |