Features
Cabinet is a single piece rotational moulded in medium density polyethylene, fully UV protected and waterproof IP 55
Front grille in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing
Stainless steel bracket
One 10" high-output LF transducer with 2" voice coil
One RCF Precision Neodymium 1" Compression Driver with 1.5" voice coil
90° x 40° constant directivity horn
Built in passive crossover and selectable line transformer
10° X 20° enclosure sides for array configurations
Active Mosfet Compression Driver Protection
LICC (Low Impedance Compensated Crossover) network
12 brass suspension points (M8)
Acoustical Specifications
Frequency Response -10 dB: 95 Hz ÷ 20 kHz
Frequency Response -3 dB: 120 Hz ÷ 20 kHz
Max SPL @ 1m: 118 dB
Horizontal coverage angle: 90°
Vertical coverage angle: 40°
Directivity index; Q: 11
System Sensitivity: 95 dB
Nominal Impedance: 16 Ω
Power Handling: 200 Watt
Peak Power Handling: 800 Watt
Recommended Amplifier: 400
Protections: Dinamyc
Crossover frequencies: 2000 Hz
TRANSDUCERS
Compression Driver: 1.5" HF driver, 1" voice coil
Nominal Impedence: 8 Ω
Input Power Rating: 25 Watt AES
Sensitivity: 106 dB
Woofer: 10" woofer, 2.5" voice coil
Nominal Impedence: 16 Ω
Input Power Rating: 180 Watts AES
Sensitivity: 95 dB
INPUT SECTION
Input connector: 5m, 4-adriges Neopren Kabel
Constant voltage transformer: 70/100
Power Selection: 70V/30W ,15W , 100V/60W, 30W
CABINET
Cabinet Material: Polyethylene rotomoulded
Hardware: 12 x M8 inserts+ U-brackets and pair of spacers
Grille: Custom perforated aluminium grille with open-cell fiber and water repellent woven fabric backing
Colour: Grey
PHYSICAL SPECIFICATIONS
Height: 350 / 13.78 mm/inch
Width: 350 / 13.78 mm/inch
Depth: 320 / 12.60 mm/inch
Net Weight: 13.5 / 29.75 Kg/Lbs |